ATI Technologies QC-303 Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} ATI Technologies QC-303. ATI Technologies QC-303 17 pagina's. Robotic tool changer

Manual, Tool Changer, QC-303

Document #9620-20-B-303 Base Tool Changer-09

If the customer chooses to design and build a robot interface plate, the following should be

considered:

The interface plate should be designed to include bolt holes for mounting, dowel pins and a

boss for accurate positioning on the robot and Master Plate.

The interface plate must be properly designed to provide rigid mounting to the Master plate

boss area and to maintain a gap between the interface plate and the body outside of the boss.

The plate design should take into account clearances required for Tool Changer module

attachments and accessories.



Pinnacle Park

1031 Goodworth Drive

Figure 2.1—Typical Installation



Apex, NC 27539

Tel: 919.772.0115

B - 4

Tool Plate Assembly with

Master Plate Assembly with

DC45 and PV3 Modules



Fax: 919.772.8259

www.ati-ia.com

