ATI Technologies QC-303 Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ATI Technologies QC-303. ATI Technologies QC-303 17 pages. Robotic tool changer

Imprimer la page
Manual, Tool Changer, QC-303
Document #9620-20-B-303 Base Tool Changer-09
If the customer chooses to design and build a robot interface plate, the following should be
considered:
The interface plate should be designed to include bolt holes for mounting, dowel pins and a
boss for accurate positioning on the robot and Master Plate.
The interface plate must be properly designed to provide rigid mounting to the Master plate
boss area and to maintain a gap between the interface plate and the body outside of the boss.
The plate design should take into account clearances required for Tool Changer module
attachments and accessories.

Pinnacle Park
1031 Goodworth Drive
Figure 2.1—Typical Installation
Apex, NC 27539
Tel: 919.772.0115
B - 4
Tool Plate Assembly with
Master Plate Assembly with
DC45 and PV3 Modules
DC45 and PV3 Modules
Fax: 919.772.8259
www.ati-ia.com