Communications Specialties Scan Do 1024 Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Communications Specialties Scan Do 1024. Communications Specialties Scan Do 1024 16 pagina's. Computer to video scan converter
Pagina afdrukkenShrinking the Image
to Fit on the Screen
Reducing Flicker
in the Image
UNDERSCAN: Because most TV monitors "overscan" their
image display, some desirable part of the image may be lost.
The UNDERSCAN button can be used to shrink the image,
both horizontally and vertically, approximately 10% in size.
Push the button to shrink the image and the green light will
illuminate. Push it again to restore the image to its original
size and the light will extinguish.
ANTI-FLICKER: This button will activate one of two levels of
flicker reduction. When the button is pressed the first time,
the green light will indicate it is in the level 1 stage of flicker
reduction.
This level 1 stage may still show some flicker but will preserve
a greater amount of detail compared to level 2. Level 1
should be used unless you still find the flicker annoying.
Pressing the button again will cause the green light to stay lit
and go into the level 2 stage of flicker reduction. This level
2 stage will eliminate the flicker but will also reduce the detail
in the image.
Pressing the button once again will extinguish the green light
and turn off the anti-flicker filter.
You should try the different settings for this button to see
which gives the best results for the application you are
viewing.
FREEZE: You may desire to freeze or stop the image on your
video screen without stopping your computer application. If
the button is pressed, the image is frozen on Scan Do 1024's
video outputs. The green light will also illuminate. Press the
button again to extinguish the light and resume normal
operation.
While in the freeze mode, all keypad functions are disabled
except the FREEZE key. If you attempt to press any other
key while in the freeze mode, the indicator light on the freeze
key will flash to indicate Scan Do 1024 is in the freeze mode.
Scan Do 1024 User's Manual
Page 7