Atid AT870 Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Atid AT870. Atid AT870 16 pagina's. Rf-id bluetooth
Ook voor Atid AT870: Beknopte handleiding (12 pagina's), Gebruikershandleiding (11 pagina's)

Pagina afdrukken
Atid AT870 Handmatig
● Bluetooth Manager Reference Guide
Your AT870 can optionally be built in with the Bluetooth Manager program to communicate with wireless printer. In
the Bluetooth Stack Service, your AT870 only supports SPP (Serial Printer Profile)
To make sure your Bluetooth device, keep these following tips in your mind.
1.1 To enable Bluetooth
Bluetooth is not started by default after a clean-boot is performed. It is because of your AT870 retains the bluetooth
state when a clean-boots are performed. For example, if Bluetooth was enabled before a clean-boot, Your AT870
boots up with the Bluetooth state enabled and Bluetooth virtual COM ports registered. Reactivate the connections
manually as the system does not do them. If Bluetooth was disable before a clean boot was performed, the AT870
boots up with disabled.
To turn on Bluetooth:
1.2 Bluetooth Manager
Bluetooth Manager is a program that makes your AT870 scan SPP device and connect to a device that you want use
in its scanning range.
After connecting your AT870 to SPP device through Bluetooth Manager, the AT870 supports Virtual Com Port (COM3)
and sets up the Baud-rate as 9600 bps