Anderson LeakTrac Wireless 2400 Gebruiksaanwijzing - Pagina 16

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Anderson LeakTrac Wireless 2400. Anderson LeakTrac Wireless 2400 16 pagina's.

Maintenance:

Battery Replacement:

The Batteries for the LeakTrac 2400 should be replaced whenever the LOW BAT

Indicator light is illuminated, or as a first step in problem solving if the unit is not

working properly.

The Signal Processing Unit requires two AA batteries that are replaced by remov-

ing the plastic cover on the back of the unit. The Power Booster requires 8AA

batteries that are replaced by removing the brass knobs and bottom panel of the

unit.

Regular Maintenance:

The brass plate on the Input Float may build up some corrosion over time.

Regularly clean the plate with steel wool to keep it conductive.

Care:

As with any electrical equipment, moisture will cause corrosion problems. Do

what you can to keep the equipment and the inside of the case dry. When used

regularly, leave the case open at night to allow all the components to dry out.

Safety:

Because a small electrical charge is being placed in the pool water there is a risk

of minor electrical shocks being felt if you become a connection from the pool wa-

ter to ground. This shock should not be harmful to persons with out medical con-

ditions. However, several safety rules should be followed as a precaution:

- Never contact both the pool water and the ground while the LeakTrac

2400 is turned on

- Always wear rubber soled shoes when using the LeakTrac 2400

- Never allow swimmers in the pool while the LeakTrac 2400 is turned on

2885 Country Drive #190 · St. Paul, MN 55117 · 800-348-1316 · www.leaktools.com