Andon AG-605A Bedieningshandleiding - Pagina 8

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Andon AG-605A. Andon AG-605A 16 pagina's.

seconds starts.

Step 8

Your blood glucose result will appear on the screen after 5 seconds. The result

will be automatically saved in meter simultaneously.

Note:

To ensure accurate results, make sure the confirmation window of the

Test Strip is completely filled with your blood sample.

Step 9

The Glucose AG-605A results range between 20 mg/dL to 600 mg/dL(1.1

mmol/L to 33.3 mmol/L). If a "HI" message appears on your display, your

Glucose Meter has detected that your blood glucose level is higher than

600mg/dL or 33.3mmol/L. It is suggested that you review your testing

procedure and test again with a new Glucose Test Strip to confirm the result. If

the same result occurs, consult your healthcare professional immediately.

Step 10

If a "LO" message appears on your display, your Glucose Meter has detected

that your blood glucose level is lower than 20mg/dL or 1.1mmol/L. It is

suggested that you review your testing procedure and test again with a new

Glucose Test Strip to confirm the result. If the same result occurs, consult your

healthcare professional immediately.

After approximate 2 minutes, if no further tests are performed, the Glucose

Meter will automatically turn off.

Step 11

Remove the test strip from the meter and discard it. It is strongly suggested

that you use a tissue to remove the used test strip. Discard the used lancet

properly in accordance with local、state、and federal law. After remove the test

strip from the test port, the result goes on showing for one minute and then the