Electrolux 36" Ceramic Gebruiks- en onderhoudshandleiding - Pagina 13
Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Electrolux 36" Ceramic. Electrolux 36" Ceramic 26 pagina's. 30” and 36” free-standing range hood
Ook voor Electrolux 36" Ceramic: Handleiding voor installatie-instructies (7 pagina's), Installatie-, gebruiks- en onderhoudshandleiding (22 pagina's), Handleiding voor installatie-instructies (25 pagina's), Handleiding voor installatie-instructies (8 pagina's)
Pagina afdrukken
OPERATING THE SINGLE SURFACE RADIANT
ELEMENTS
The cooktop has single radiant surface elements at 2 locations; the right and
left rear (Figs. 1 & 2) element positions.
To Operate the Single Surface Element
1. Place correctly sized cookware on the radiant surface element.
2. Touch and hold the
POWER
light above the
will turn ON. Note: If no other key pad is touched within
POWER
20 seconds the request to Power ON the cooktop will clear.
3. Touch and hold the
ON OFF
beep is heard. The indicator light located above the
Note: If no further pads are touched within 10 seconds the
request to power the element ON will clear.
4. Touch
pad once to turn ON the power level to HI. Touch
pad once for MEDIUM, touch
med
to LO or touch
pad once to set the power level to KEEP
warm
WARM setting.
5. Each touch of the
power level. Lo is the lowest power level available. Note: The power level may be
adjusted at any time while the element is ON.
6. When cooking has been completed touch the
and if no other surface element is used touch the
Each surface element provides a constant amount of heat at each setting. A glowing
red surface heating area extending beyond the bottom edge of the cookware indicates
the cookware is too small for the surface heating area.
Note: The Hot Surface Indicator Light will turn ON if the cooktop is still hot and will
remain ON until the heating surface area has cooled sufficiently.
CAUTION
CA
CA
UTION
UTION
UTION
CA
CA
UTION
!
Radiant surface elements may appear to have cooled after they have been turned OFF. The Hot Surface
Indicator Light will turn ON and will continue to glow until the glass cooktop has cooled down to a
moderate level. The glass surface may still be hot and burns may occur if the glass surface is touched
before the indicator light has turned OFF.
Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on
top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons
could catch fire if placed too close to the surface elements.
Setting Surface Controls
key pad until a beep sound. The power indicator
pad for the desired element position until a
pad once for power level
or
pad will increase or decrease the
ON OFF
pad will glow.
ON OFF
POWER
lock
warm
ON OFF
pad once to turn the element OFF
key pad to turn off the cooktop.
POWER
13
med
med
med
med
POWER
lock
warm
ON OFF
size
ON OFF
ON OFF
size
ON OFF
hot surface
hot surface
hot surface
hot surface
Fig. 1
med
med
med
med
med
size
ON OFF
ON OFF
size
ON OFF
ON OFF
size
timer
hot surface
hot surface
hot surface
hot surface
hot surface
Fig. 2
timer