Advanced PureAir Newport ULTRA Gebruiksaanwijzing - Pagina 14

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Advanced PureAir Newport ULTRA. Advanced PureAir Newport ULTRA 19 pagina's.

CLEANING AND MAINTENANCE

Clean the dust collector cell

Use provided brush or toothbrush to clean.

Please take care not to damage any wiring while

cleaning the dust collector cell, if any wire is broken,

the unit will lose part or all of its dust collecting

capability.

Any broken wire should be thrown away instead

of being left inside the unit. Otherwise, a dangerous

short-circuit or high-voltage sparks may occur. Please

contact authorized service center for maintenance or replacement.

Thoroughly dry the dust collector cell

Shake excess water from the dust collector cell to

speed up drying time.

DO NOT install a damp dust collector cell directly

into the unit may cause dangerous short-circuit or

malfunction.

Note : If the front cover or dust collector cell is not

properly installed after cleaning, the unit will not

operate.

Reset the "CLEAN CELL" indicator

Please refer to instructions on page 7 for resetting

after cleaning, otherwise the indicator will remain

on screen.