Advanced PureAir Newport ULTRA Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Advanced PureAir Newport ULTRA. Advanced PureAir Newport ULTRA 19 pagina's.

C) Operation with photocatalyst(TiO

Button C

is used for switching the photocatalyst on and off (Symbol "UV" lights up). This

appliance combines advanced photocatalyst technologies to reduce odors and chemical fumes

from glues, solvents, and synthetic materials when air passes through the ﬁlter and is activated by

the internal UV LED. If turned off, the appliance will continue to ﬁlter particles from the air that

passes through the ﬁlter but its odor and VOC capability will be greatly reduced.

D) Timer

Using button D

, the operation time can be set adjustable between 1~9 hours or continuous

operation (circulated

/5h/6h/7h/8h/9h/ circulated

seconds.

Sleep mode

By pressing the button E

display brightness, appliance continue to operate with silence technology. If button E

again, the appliance will no longer be in sleep mode.

F) Cleaning indicator

If red "CLEAN CELL" indicator appears on the display, the appliance should be cleaned as

recommended by the manufacturer. When the dust collector cell is re-installed after cleaning,

switch on the appliance and keep pressing the button E

buzzer beeps, "CLEAN CELL" indicator goes out and "CLEAN CELL" timer is reset.

Reset buttons

G) Replace indicator

If red "REPLACE FILTER" indicator appears on the display, the ﬁlters (HEPA/Activated

carbon/Formaldehyde)should be replaced as recommended by the manufacturer. When the ﬁlters

are re-installed after replacement, switch on the appliance and keep pressing the button E

at least 3 seconds until buzzer beeps, "REPLACE FILTER" indicator goes out and

"REPLACE FILTER" timer is reset.

Reset buttons

INSTRUCTIONS FOR OPERATING

), Symbol J shows the operating period that has been set (1h/2h/3h/4h

). The display will automatically show the current value after a few

once, the sleep mode is switched on which automatically dims the

)

and D

at least 3 seconds until

pressing for 3 seconds

pressed

Reset

and

Reset