Advanced PureAir Newport ULTRA Manual de instruções de utilização - Página 9
Procurar online ou descarregar pdf Manual de instruções de utilização para Filtro de ar Advanced PureAir Newport ULTRA. Advanced PureAir Newport ULTRA 19 páginas.
Imprimir página
C) Operation with photocatalyst(TiO
Button C
is used for switching the photocatalyst on and off (Symbol "UV" lights up). This
appliance combines advanced photocatalyst technologies to reduce odors and chemical fumes
from glues, solvents, and synthetic materials when air passes through the filter and is activated by
the internal UV LED. If turned off, the appliance will continue to filter particles from the air that
passes through the filter but its odor and VOC capability will be greatly reduced.
D) Timer
Using button D
, the operation time can be set adjustable between 1~9 hours or continuous
operation (circulated
/5h/6h/7h/8h/9h/ circulated
seconds.
Sleep mode
E)
By pressing the button E
display brightness, appliance continue to operate with silence technology. If button E
again, the appliance will no longer be in sleep mode.
F) Cleaning indicator
If red "CLEAN CELL" indicator appears on the display, the appliance should be cleaned as
recommended by the manufacturer. When the dust collector cell is re-installed after cleaning,
switch on the appliance and keep pressing the button E
buzzer beeps, "CLEAN CELL" indicator goes out and "CLEAN CELL" timer is reset.
Reset buttons
G) Replace indicator
If red "REPLACE FILTER" indicator appears on the display, the filters (HEPA/Activated
carbon/Formaldehyde)should be replaced as recommended by the manufacturer. When the filters
are re-installed after replacement, switch on the appliance and keep pressing the button E
B
at least 3 seconds until buzzer beeps, "REPLACE FILTER" indicator goes out and
"REPLACE FILTER" timer is reset.
Reset buttons
INSTRUCTIONS FOR OPERATING
), Symbol J shows the operating period that has been set (1h/2h/3h/4h
). The display will automatically show the current value after a few
once, the sleep mode is switched on which automatically dims the
+
+
)
2
and D
at least 3 seconds until
pressing for 3 seconds
pressing for 3 seconds
7
pressed
Reset
and
Reset