Bose FreeSpace 3 Toepassingsnotitie

Blader online of download pdf Toepassingsnotitie voor {categorie_naam} Bose FreeSpace 3. Bose FreeSpace 3 2 pagina's. Ceiling install kit
Ook voor Bose FreeSpace 3: Installateurshandleiding (15 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (13 pagina's), Ontwerphandleiding (4 pagina's), Ontwerphandleiding (4 pagina's), Snelstarthandleiding (2 pagina's), Servicehandleiding (15 pagina's)

Pagina afdrukken

How to Modify FreeSpace 3 Wiring

This application note illustrates how to connect an Acoustimass

installations.

I. Use of Transformer

Connecting an amplifier output to a single

module in a 70V configuration:

The transformer tap setting from the factory is for 200W use. To set it for lower wattage, remove the end of

the '+' jumper wire connected to 200W and reattach it to the appropriate tap (100W, 50W or 25W).

II. Use of Direct Mode (Transformer Bypass)

Connecting a mono source with the

transformer bypassed:

Note: Jumpers required

TRANSFORMER SETTINGS

for 70V/100V operation.

For transformer bypass,

remove jumpers from

transformer settings and

use 4-8Ω input.

SAT 2

SATELLITE

CONNECTIONS

MONO

70V/100V

INPUT

SAT 1

STEREO

CH 2

MONO

STEREO

USE JUMPERS

CH 1

FreeSpace 3

Acoustimass Module

P R O F E S S I O N A L S Y S T E M S

FreeSpace

Business Music System

Jumpers in

the factory-

installed

configuration

___

for 200W use.

Connecting a stereo source with the

transformer bypassed:

SAT 4

SAT 3

SAT 2

SAT 1

4-8Ω

INPUT

bass module in three common

Note: Jumpers required

TRANSFORMER SETTINGS

for 70V/100V operation.

For transformer bypass,

remove jumpers from

transformer settings and

use 4-8Ω input.

SAT 2

SATELLITE

CONNECTIONS

MONO

70V/100V

INPUT

SAT 1

STEREO

CH 2

MONO

STEREO

USE JUMPERS

CH 1

FreeSpace 3

Acoustimass Module

SAT 4

SAT 3

SAT 2

SAT 1

4-8Ω

INPUT

p r o . b o s e . c o m