Bose FreeSpace 3 Nota de aplicação

Procurar online ou descarregar pdf Nota de aplicação para Altifalantes Bose FreeSpace 3. Bose FreeSpace 3 2 páginas. Ceiling install kit
Também para Bose FreeSpace 3: Manual do instalador (15 páginas), Manual de instalação (12 páginas), Manual de instalação (13 páginas), Manual de Conceção (4 páginas), Manual de Conceção (4 páginas), Manual de início rápido (2 páginas), Manual de serviço (15 páginas)

Imprimir página
Bose FreeSpace 3 Nota de aplicação
How to Modify FreeSpace 3 Wiring
This application note illustrates how to connect an Acoustimass
installations.
I. Use of Transformer
Connecting an amplifier output to a single
module in a 70V configuration:
PA
The transformer tap setting from the factory is for 200W use. To set it for lower wattage, remove the end of
the '+' jumper wire connected to 200W and reattach it to the appropriate tap (100W, 50W or 25W).
II. Use of Direct Mode (Transformer Bypass)
Connecting a mono source with the
transformer bypassed:
Note: Jumpers required
TRANSFORMER SETTINGS
for 70V/100V operation.
For transformer bypass,
remove jumpers from
transformer settings and
+
use 4-8Ω input.
SAT 2
SATELLITE
CONNECTIONS
MONO
70V/100V
INPUT
SAT 1
STEREO
CH 2
MONO
STEREO
USE JUMPERS
CH 1
FreeSpace 3
®
Acoustimass Module
P R O F E S S I O N A L S Y S T E M S
FreeSpace
Business Music System
Jumpers in
the factory-
installed
configuration
___
for 200W use.
Connecting a stereo source with the
transformer bypassed:
SAT 4
SAT 3
SAT 2
SAT 1
4-8Ω
INPUT
®
3
®
bass module in three common
Note: Jumpers required
TRANSFORMER SETTINGS
for 70V/100V operation.
For transformer bypass,
remove jumpers from
transformer settings and
+
use 4-8Ω input.
SAT 2
SATELLITE
CONNECTIONS
MONO
70V/100V
INPUT
SAT 1
STEREO
CH 2
MONO
STEREO
USE JUMPERS
CH 1
FreeSpace 3
®
Acoustimass Module
SAT 4
SAT 3
SAT 2
SAT 1
4-8Ω
INPUT
1
2
OF
p r o . b o s e . c o m