ABSCO SHEDS ADGAZEBO63 Handmatig - Pagina 8
Blader online of download pdf Handmatig voor {categorie_naam} ABSCO SHEDS ADGAZEBO63. ABSCO SHEDS ADGAZEBO63 14 pagina's. Signature gazebo
Pagina afdrukkenROOF PANELS
3
4
TOP VIEW - Fastening layout
3
x
x
4
First
panel
x
x
5
Absco Industries
ABSCO SIGNATURE GAZEBO
MODEL: ADGAZEBO63
6.12m W x 3.11m D x 2.60m H
5
x
x
x
x
Assembly Instruction Manual
3. On the middle rib, fasten panel to low side
beam with a tek 14 x 125 mm FAST104.
Don't over-tighten and crush the panel.
For further screw position detail see Fastening
layout below.
4. Check for consistent overhang along end beam
- adjust if required.
Fasten with a tek 14 x 125 mm FAST104 at the
midpoint of side beam - in the sheet pan.
5. On the middle rib, fasten to front beam with
another tek 14 x 125 mm FAST104.
FRONT VIEW - Laying the roof panels
A. Overlap rib
Fixed panel
6. Fasten roof panels to beams with
a tek 14 x 125 mm FAST104 at the
remaining positions.
NOTE: rib fixed to centreline of beam
unless noted otherwise.
NOTE: 3, 4 & 5 are the screws done
x
earlier.
Last
panel
Don't over tighten and crush the panel.
x
7. Use shorter tek screws with neoprene
washers FAST101 at the locations
marked with 'x' where the 'top skins'
overlap.
Model: ADGAZEBO63
B. Press here
'Bottom skin' male &
female features align
Complete
4/12/23
1.00
8