ABSCO SHEDS ADGAZEBO63 Handmatig - Pagina 10

Blader online of download pdf Handmatig voor {categorie_naam} ABSCO SHEDS ADGAZEBO63. ABSCO SHEDS ADGAZEBO63 14 pagina's. Signature gazebo

FRONT & REAR FLASHING

LOW SIDE UNDERSIDE

VIEW

6. Repeat these steps for

the other end flashing. Just

remember

mirrored version.

FRONT EDGE

FRONT FLASHING

TR37

UNDERSIDE VIEW

Absco Industries

Assembly Instruction Manual

ABSCO SIGNATURE GAZEBO

MODEL: ADGAZEBO63

6.12m W x 3.11m D x 2.60m H

make

the

FRONT TOP VIEW

TR37

Model: ADGAZEBO63

5. Refit the flashing, and fasten using pop rivets

FAST102 at the locations shown.

Only at the low side, on top, use teks with

neoprene washers FAST101.

HIGH SIDE UNDERSIDE VIEW

To increase weather protection do the following.

A. Turn up pans of sheet 15 degrees using "Sheet

Metal Locking Pliers"

B. Installing foam gaskets RWG28 within 90mm

of the edge.

Some trimming may be required to fit at ends.

Apply silicone to the face that sits in the pan.

1. Starting at the front end of the structure,

take one TR37 flashing and place over the front

flashing and roof panels as shown.

2. Take the second TR37 flashing and place

alongside, butted against the first & trim so it

finishes at the rear flashing.

3. Fasten with pop rivets FAST102 along the

underside are shown.

Fasten with tek screws with neoprene washers

FAST101 along the top.

4/12/23

1.00