Bose VideoWave III Installatiehandleiding - Pagina 12
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Bose VideoWave III. Bose VideoWave III 20 pagina's. Bose soundtouch wireless adapter owner's guide
Ook voor Bose VideoWave III: Bedieningshandleiding (38 pagina's), Gebruikershandleiding (14 pagina's)
Pagina afdrukken
Physical Setup
7.
Push the monitor back to within 1–4 in. (2.5–10 cm) from
the wall.
1-4 in.
(2.5-10.0 cm)
Tabletop
8.
Tighten the straps to remove any slack between the monitor
and the wall.
9.
Bundle the remaining length of the straps and secure them
out of reach behind the monitor.
12 - English
Wall-mounting the monitor
The VideoWave
III entertainment system is compatible with any
®
VESA certified bracket that uses a 400 mm x 400 mm screw
pattern. The mount must be able to support the weight of the
monitor. The 46 in. monitor weighs 120 lbs. (54 kg). The 55 in.
monitor weighs 135 lbs. (61 kg).
Articulating wall mounts are not recommended, because the
changes in position may affect the acoustics. If the VideoWave
system is mounted over a fireplace, it must be placed over a
mantle that is a minimum of 6 in. (15.3 cm) deep to protect the
system from overheating.
1.
On the rear panel of the monitor, firmly pull out on the
bottom of the connector cover (A), and pull down (B) to
remove it.
B
A