Bose VideoWave III 설정 매뉴얼 - 페이지 12

{카테고리_이름} Bose VideoWave III에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose VideoWave III 20 페이지. Bose soundtouch wireless adapter owner's guide
Bose VideoWave III에 대해서도 마찬가지입니다: 운영 매뉴얼 (38 페이지), 소유자 매뉴얼 (14 페이지)

페이지 인쇄

Physical Setup

Push the monitor back to within 1–4 in. (2.5–10 cm) from

the wall.

1-4 in.

(2.5-10.0 cm)

Tabletop

Tighten the straps to remove any slack between the monitor

and the wall.

Bundle the remaining length of the straps and secure them

out of reach behind the monitor.

12 - English

Wall-mounting the monitor

The VideoWave

III entertainment system is compatible with any

VESA certified bracket that uses a 400 mm x 400 mm screw

pattern. The mount must be able to support the weight of the

monitor. The 46 in. monitor weighs 120 lbs. (54 kg). The 55 in.

monitor weighs 135 lbs. (61 kg).

Articulating wall mounts are not recommended, because the

changes in position may affect the acoustics. If the VideoWave

system is mounted over a fireplace, it must be placed over a

mantle that is a minimum of 6 in. (15.3 cm) deep to protect the

system from overheating.

On the rear panel of the monitor, firmly pull out on the

bottom of the connector cover (A), and pull down (B) to

remove it.