Bose VideoWave III 설정 매뉴얼 - 페이지 11
{카테고리_이름} Bose VideoWave III에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose VideoWave III 20 페이지. Bose soundtouch wireless adapter owner's guide
Bose VideoWave III에 대해서도 마찬가지입니다: 운영 매뉴얼 (38 페이지), 소유자 매뉴얼 (14 페이지)
페이지 인쇄
2.
Using the same bolts, attach the two straps to the back of
the monitor.
CAUTION: The included screws are for use only into wood-
studded wall constructions with 1 in. (maximum) drywall. For all
other types of wall construction, please contact a professional
installer. Use caution to avoid any electrical or plumbing lines
running through the studs.
3.
Locate the two wall studs closest to the straps. Each strap
should be attached to the wall stud closest to it.
CAUTION: Do not attach both straps to the same stud.
4.
Hold the bracket on the end of each strap against the wall
a minimum of 18 in. (46 cm) or maximum of 24 in. (61 cm)
above the tabletop. In the center of each wall stud, mark the
location of the two holes in the bracket.
Tabletop
5.
Using a 7/64 in. (3 mm) drill bit (not included), drill 4 pilot
holes.
6.
Secure each bracket to the wall using 2 of the provided
screws.
Physical Setup
English - 11