Bose VideoWave III 설정 매뉴얼 - 페이지 10

{카테고리_이름} Bose VideoWave III에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose VideoWave III 20 페이지. Bose soundtouch wireless adapter owner's guide
Bose VideoWave III에 대해서도 마찬가지입니다: 운영 매뉴얼 (38 페이지), 소유자 매뉴얼 (14 페이지)

Bose VideoWave III 설정 매뉴얼
Physical Setup
7.
Route both cords through the leg of the stand and re-attach
the connector cover.
8.
Plug the AC power cord from the monitor into a live AC
(mains) outlet.
9.
Restore the connector cover.
CAUTION: Bose
strongly recommends installing the supplied
®
two anti-tip straps that, when properly installed, provide an extra
measure of security in the event that the monitor accidentally
starts to tip over.
10 - English
Leg of stand

Installing the anti-tip straps

It is important that you install both straps according to the
following instructions.
WARNING: Do not use the anti-tip straps for any application
other than the one specified in this setup guide.
CAUTION: If you are unsure of the construction methods used
in the space where you are setting up the monitor, or if you
do not understand these instructions or have any concerns or
questions, please contact a professional installer.
1.
Using the provided 5/32 in. (4 mm) hex wrench, remove the
top two bolts from the rear panel of the monitor.
Bolts to
remove