Bose Lifestyle 35 Series II Installatiehandleiding - Pagina 26

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Bose Lifestyle 35 Series II. Bose Lifestyle 35 Series II 42 pagina's. Noise cancelling
Ook voor Bose Lifestyle 35 Series II: Installatiehandleiding (36 pagina's), Gebruikershandleiding (25 pagina's), Gebruikershandleiding (24 pagina's), Gebruikershandleiding (13 pagina's), Handleiding voor snelle installatie (3 pagina's), Bedieningshandleiding (46 pagina's), Gebruikershandleiding (36 pagina's), Gebruikershandleiding (32 pagina's), Snelstarthandleiding (2 pagina's), Fabrieksinstellingen (2 pagina's), Snelstarthandleiding (2 pagina's), Gebruikershandleiding (38 pagina's)

Pagina afdrukken

Bose Lifestyle 35 Series II Installatiehandleiding

ASIC

YSTEM

ONNECTIONS

Installing the TV on/off sensor

Figure 22

TV on/off sensor installed

on your TV

The TV on/off sensor enables the system to automatically turn on the TV, as needed, when

another video source (DVD, cable/satellite box, etc.) is selected. If you choose not to use the

sensor, you need to turn on your TV separately.

For a larger TV, you may want a second person to help as you follow the steps below:

1. Plug the sensor cord connector into the TV SENSOR jack on the media center.

If you are using a SCART adapter, plug the sensor directly into the pass-through

jack provided on the adapter (Figure 14 on page 18).

2. Temporarily position the TV on/off sensor on the back of your TV (Figure 22).

Note: DO NOT attach the supplied mounting strip until you have tested and activated the

automatic feature as explained below.

Sensor

mounting

strips

Note: Mount the sensor on the bottom rear of a projection TV chassis. Front projectors with a

separate screen may not work with the sensor.

3. Turn on your TV to test the sensor and activate the feature.

A. On the LIFESTYLE

to move around the on-screen menu. Press Enter to make selections:

• Move right to Video and press Enter.

• Move down to TV Power and press Enter.

• Move up or down to select the proper TV Power option:

Automatic (for TV models that do not use a European-style SCART

connector).

Euro Connector (for TV models that use a SCART connector).

• Press Enter.

B. On the rear of the TV, move the sensor as needed, and notice when the on-screen

changes from

TV Power Status

C. On the TV screen, move down to

D. Press Exit to leave the System menu. This completes activation.

Français

TV on/off sensor

Rear of TV

system remote control, press System and use the arrows

TV not detected

, select

TV Power

Español

Sensor cord

Media center

TV SENSOR

connection panel

jack

TV ON

and press Enter.

Automatic,

English