Bose Lifestyle 35 Series II Installation Manual - Page 26

Browse online or download pdf Installation Manual for Headsets Bose Lifestyle 35 Series II. Bose Lifestyle 35 Series II 42 pages. Noise cancelling
Also for Bose Lifestyle 35 Series II: Installation Manual (36 pages), Owner's Manual (25 pages), Owner's Manual (24 pages), Owner's Manual (13 pages), Quick Setup Manual (3 pages), Operating Manual (46 pages), Owner's Manual (36 pages), Owner's Manual (32 pages), Quick Start Manual (2 pages), Factory Reset (2 pages), Quick Start Manual (2 pages), Owner's Manual (38 pages)

Print Page
Bose Lifestyle 35 Series II Installation Manual
B
S
C
ASIC
YSTEM
ONNECTIONS

Installing the TV on/off sensor

Figure 22
TV on/off sensor installed
on your TV
26
The TV on/off sensor enables the system to automatically turn on the TV, as needed, when
another video source (DVD, cable/satellite box, etc.) is selected. If you choose not to use the
sensor, you need to turn on your TV separately.
For a larger TV, you may want a second person to help as you follow the steps below:
1. Plug the sensor cord connector into the TV SENSOR jack on the media center.
If you are using a SCART adapter, plug the sensor directly into the pass-through
jack provided on the adapter (Figure 14 on page 18).
2. Temporarily position the TV on/off sensor on the back of your TV (Figure 22).
Note: DO NOT attach the supplied mounting strip until you have tested and activated the
automatic feature as explained below.
Sensor
mounting
strips
Note: Mount the sensor on the bottom rear of a projection TV chassis. Front projectors with a
separate screen may not work with the sensor.
3. Turn on your TV to test the sensor and activate the feature.
A. On the LIFESTYLE
to move around the on-screen menu. Press Enter to make selections:
• Move right to Video and press Enter.
• Move down to TV Power and press Enter.
• Move up or down to select the proper TV Power option:
Automatic (for TV models that do not use a European-style SCART
connector).
Euro Connector (for TV models that use a SCART connector).
• Press Enter.
B. On the rear of the TV, move the sensor as needed, and notice when the on-screen
changes from
TV Power Status
C. On the TV screen, move down to
D. Press Exit to leave the System menu. This completes activation.
Français
TV on/off sensor
Rear of TV
®
system remote control, press System and use the arrows
TV not detected
, select
TV Power
Español
Sensor cord
Media center
TV SENSOR
connection panel
jack
to
.
TV ON
and press Enter.
Automatic,
English