DROPLUX HX-DLV004-RFBK Product Introductie - Pagina 7
Blader online of download pdf Product Introductie voor {categorie_naam} DROPLUX HX-DLV004-RFBK. DROPLUX HX-DLV004-RFBK 7 pagina's. 2.4g wireless-sync-control rgbcw led controller
Pagina afdrukken
Long-press "mode key" for 5 seconds, the remote
2
indicator light changes from 100% light to off, means
entering the code value receiving state.
Power on the receiver, will see remote control indicator
3
light flash 3 times.
* For security of the system, the distance from remote control to the one receiver should be less
than 2 meters in this operation.
* Only one time operation is requested for the whole system, no need different operation for
different zones.
(5) The remote controller restores the factory setting: it means that the remote controller will be
restored to the factory's unique code value.
Step
1
Long press "mode " for 20 seconds
Press the "RGB-OFF" to confirm, the remote
2
indicator light flashes 3 times
Product after-sales advantages:
1. There is no power-on time limit for matching code, only need to power on the receiver;
2. Since the code value of the receiver cannot be covered, the new controller pair code won't affect the
controller already fixed code;
3, The same model or compatible remote control can copy the code value between each other to achieve
the same control function;
4. If the remote control which matched code with the receivers is lost or does not work properly, it is not
necessary to re-clear and re-code all the receivers. You can copy the code value from the receivers to the
new remote to achieve the same control function.
About installation of remote control's bracket:
1.Accessories include: bracket 1pc, 3M foam sponge glue 1pc, screw 2pcs, expansion tube 2pc.
2. There are 2 options for bracket installation:
1) Using screw and expansion tube make drilling installation (suitable for uneven and ash surface);
2) Using 3M foam sponge glue make free drilling installation (suitable for flat no ash surface).
Operation
Will automatically exit the code value
receiving state after 30 seconds, or exit
after
learning
the
successfully.
Code copying is finished and exit code
value receiving status.
Instructions
The remote indicator light dim down and
flashes continuously until the 20th second and
then back to 100% light. Means this step is
finished.
Restore factory settings successfully.
code
value
7 / 7