Anker Nebula Prizm II Pro Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Anker Nebula Prizm II Pro. Anker Nebula Prizm II Pro 14 pagina's.
Pagina afdrukken
Specifications
Specifications and design are subject to
change without notice.
Power supply: AC 110~240V
Power consumption: < 125 W
Display technology: 5 inch LCD 1920 × 1080P
Light source: RGB LED
Projection image size: 40 - 120 inch
Resolution: 1920 x 1080P
Brightness: 200 ANSI / 1000 lumens
Contrast ratio: 1500 : 1
Throw ratio: 1.4
Throw distance: 1m to 3m
Speaker drivers: 2 × 5W
Remote control batteries: 2 AAA batteries
Recommended operating temperature: -10°C to 35°C / 14°F
to 95°F
Relative humidity: 15% ~ 85% (non-condensing)
Storage temperature and humidity: -20°C/-4°F ~ 65°C /
149°F, < 90% humidity
Dimensions (W × H × D): 279 × 265 × 97mm / 11 × 10.4 ×
3.8 inches
Weight: 2,420 g / 5.3 lbs
18
D2241_EN_Manual_60X110mm_20181121_V01.indd 18-19
Troubleshooting
① Could not turn on Nebula Prizm II Pro with the remote
control?
•
Make sure Nebula Prizm II Pro is connected to a
power supply.
② The remote control doesn't work?
•
Make sure the battery is already installed in the
remote control.
•
Replace the batteries.
③ Blurred image?
•
Rotate the lens until the image is clear.
•
Press
on the remote control to access the home
menu, select [Settings] > [Device Preferences] >
[Projector Settings] > [Vertical Keystone Correction]
/ [Horizontal Keystone Correction] / [Quadrilateral
Keystone Correction] to adjust the keystone value.
④ Reversed projection image?
to access the home menu, select [Settings]
•
Press
> [Device Preferences] > [Projector Settings] >
[Projector Mde] and switch to a correct state.
⑤ Constantly rebooting?
•
Go to [Settings] > [Update Available] to upgrade the
firmware and reboot your projector again.
19
2018\12\21 星期五 16:37:40