Anker Nebula Prizm II Pro Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Проектор Anker Nebula Prizm II Pro. Anker Nebula Prizm II Pro 14 сторінок.
Друкувати сторінку
Specifications
Specifications and design are subject to
change without notice.
Power supply: AC 110~240V
Power consumption: < 125 W
Display technology: 5 inch LCD 1920 × 1080P
Light source: RGB LED
Projection image size: 40 - 120 inch
Resolution: 1920 x 1080P
Brightness: 200 ANSI / 1000 lumens
Contrast ratio: 1500 : 1
Throw ratio: 1.4
Throw distance: 1m to 3m
Speaker drivers: 2 × 5W
Remote control batteries: 2 AAA batteries
Recommended operating temperature: -10°C to 35°C / 14°F
to 95°F
Relative humidity: 15% ~ 85% (non-condensing)
Storage temperature and humidity: -20°C/-4°F ~ 65°C /
149°F, < 90% humidity
Dimensions (W × H × D): 279 × 265 × 97mm / 11 × 10.4 ×
3.8 inches
Weight: 2,420 g / 5.3 lbs
18
D2241_EN_Manual_60X110mm_20181121_V01.indd 18-19
Troubleshooting
① Could not turn on Nebula Prizm II Pro with the remote
control?
•
Make sure Nebula Prizm II Pro is connected to a
power supply.
② The remote control doesn't work?
•
Make sure the battery is already installed in the
remote control.
•
Replace the batteries.
③ Blurred image?
•
Rotate the lens until the image is clear.
•
Press
on the remote control to access the home
menu, select [Settings] > [Device Preferences] >
[Projector Settings] > [Vertical Keystone Correction]
/ [Horizontal Keystone Correction] / [Quadrilateral
Keystone Correction] to adjust the keystone value.
④ Reversed projection image?
to access the home menu, select [Settings]
•
Press
> [Device Preferences] > [Projector Settings] >
[Projector Mde] and switch to a correct state.
⑤ Constantly rebooting?
•
Go to [Settings] > [Update Available] to upgrade the
firmware and reboot your projector again.
19
2018\12\21 星期五 16:37:40