ANLIDAR MYTORQ MYP40-1500 Bedienings- en onderhoudshandleiding - Pagina 2
Blader online of download pdf Bedienings- en onderhoudshandleiding voor {categorie_naam} ANLIDAR MYTORQ MYP40-1500. ANLIDAR MYTORQ MYP40-1500 8 pagina's.
Pagina afdrukken
Important safety information enclosed.
Read all these instructions before placing tool in service or operation this tool and save these instructions. It is the
responsibility of the employer to place the information in this manual into the hands of the operator. Failure to
observe the following warnings could result in injury. When using electric tools, Basic safety precautions should
always be followed to reduce the risk of fire, electric shock and personal injury, including the following:
1. Important Safety Instructions
2. Operations Cautions
3. Grounding Instructions
4. Installation Instructions
5. Specifications
6. Servicing
7. Steps to switch voltage was shown as below pictures :
Find the voltage switch on the backside of power controller
1
( be sure turn off power first )
2
Release both screws and take out the protect cover
3
Move the red thick side to switch to the correct voltage
4
Replace the protect cover and retighten both screws
WARNING
1