ANLIDAR MYTORQ MYP40-1500 Kullanım ve Bakım Kılavuzu - Sayfa 2

Kontrolör ANLIDAR MYTORQ MYP40-1500 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. ANLIDAR MYTORQ MYP40-1500 8 sayfaları.

Important safety information enclosed.

Read all these instructions before placing tool in service or operation this tool and save these instructions. It is the

responsibility of the employer to place the information in this manual into the hands of the operator. Failure to

observe the following warnings could result in injury. When using electric tools, Basic safety precautions should

always be followed to reduce the risk of fire, electric shock and personal injury, including the following:

1. Important Safety Instructions

2. Operations Cautions

3. Grounding Instructions

4. Installation Instructions

5. Specifications

6. Servicing

7. Steps to switch voltage was shown as below pictures :

Find the voltage switch on the backside of power controller

( be sure turn off power first )

Release both screws and take out the protect cover

Move the red thick side to switch to the correct voltage

Replace the protect cover and retighten both screws

WARNING