DAINCUBE DMC-L Hardware Gebruikershandleiding - Pagina 7
Blader online of download pdf Hardware Gebruikershandleiding voor {categorie_naam} DAINCUBE DMC-L. DAINCUBE DMC-L 15 pagina's. Embedded based motion controller optimized for industrial robots, arm cortex-a9 linux system
Pagina afdrukken4. Install the product
4.1. Product installation
Top
mounting
Four M3 sized tapped holes are required for mounting.
Rear
mounting
Process two M3 tapped holes on the wall to match the holes on the back of the product.
Din Rail
installation
Use with DIN Rail adapters for each installation purpose.
Back side (vertical installation): DM-A35-20mm (Contact customer support)
DAINCUBE Corp.
161mm
[Figure 7-1] top
mounting
161mm
168mm
[Figure 7-2]
Rear mounting
DMC-L hardware user's manual
holes
position
holes
position
7 / 14