DSC LCD5501Z Handleiding voor installatie-instructies - Pagina 7
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} DSC LCD5501Z. DSC LCD5501Z 12 pagina's. Dsc keypad
Ook voor DSC LCD5501Z: Gebruik (4 pagina's)
Pagina afdrukken
Door Chime Sounds
You can program the LCD5501Z keypad to
make different door chime sounds for individual
zones, or groups of zones. Each LCD5501Z
keypad can make any of four door chime sounds
for each zone that triggers the door chime:
· 6 quick beeps (default sound)
· 'Bing – Bing' tone
· 'Ding – Dong' tone
· 'Alarm' tone
NOTE: For a zone to be able to trigger the door chime
sound, the Door Chime zone attribute must also be
enabled in the control panel programming. Please
see your control panel Installation Manual.
To change the door chime sounds:
1. Enter [*][8][Installer's code].
2. Enter [*] to go to door chime sound
programming.
3. Enter a 2-digit number for the zone you want to
program [01] - [32].
4. Turn one of the following options on by pressing
[1], [2], [3], or [4]:
[1] 6 quick beeps (default sound)
[2] 'Bing – Bing' tone
[3] 'Ding – Dong' tone
[4] 'Alarm' tone
NOTE: Make sure that only one of the above options
is turned on. If more than one is on, the keypad will
sound the first option that is enabled. If none of the
options are selected, the keypad will not make any
sound when the zone is opened or closed.
5. To program the door chime sound for another
zone, repeat steps 3 and 4.
6. When you are finished programming the door
chime sounds, press [#] to exit.
7