DSC LCD5501Z 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} DSC LCD5501Z에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC LCD5501Z 12 페이지. Dsc keypad
DSC LCD5501Z에 대해서도 마찬가지입니다: 사용 (4 페이지)

Door Chime Sounds

You can program the LCD5501Z keypad to

make different door chime sounds for individual

zones, or groups of zones. Each LCD5501Z

keypad can make any of four door chime sounds

for each zone that triggers the door chime:

· 6 quick beeps (default sound)

· 'Bing – Bing' tone

· 'Ding – Dong' tone

· 'Alarm' tone

NOTE: For a zone to be able to trigger the door chime

sound, the Door Chime zone attribute must also be

enabled in the control panel programming. Please

see your control panel Installation Manual.

To change the door chime sounds:

1. Enter [*][8][Installer's code].

2. Enter [*] to go to door chime sound

programming.

3. Enter a 2-digit number for the zone you want to

program [01] - [32].

4. Turn one of the following options on by pressing

[1], [2], [3], or [4]:

[1] 6 quick beeps (default sound)

[2] 'Bing – Bing' tone

[3] 'Ding – Dong' tone

[4] 'Alarm' tone

NOTE: Make sure that only one of the above options

is turned on. If more than one is on, the keypad will

sound the first option that is enabled. If none of the

options are selected, the keypad will not make any

sound when the zone is opened or closed.

5. To program the door chime sound for another

zone, repeat steps 3 and 4.

6. When you are finished programming the door

chime sounds, press [#] to exit.