DSC Power Series Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} DSC Power Series. DSC Power Series 14 pagina's. Neo image sensor
Ook voor DSC Power Series: Referentiehandleiding (2 pagina's), Handmatig (18 pagina's), Snelle referentiehandleiding (2 pagina's), Installatie-instructies (2 pagina's), Beknopte handleiding (4 pagina's), Handleiding voor installatie-instructies (11 pagina's)

bracket.)

5. Place sensor with arm on mounting bracket. Adjust the horizontal positioning of the sensor to point towards the

desired coverage area.

6. Secure the mounting arm location by sliding lock pin into the hole. Use the washer and remaining small screw to

secure the lock pin by screwing upwards through the bottom of the hole in the mounting bracket.

7. Set PIR Sensitivity Settings – 3 options that can be set through the panel or on the dealersite:

8. Verify and Test Image Sensor Setup

https://answers.alarm.com/Installation_and_Troubleshooting/Image_Sensor/DSC_PowerSeries_Neo_Image_Sensor/DSC_PowerSeries_

Updated: Tue, 17 Apr 2018 13:46:31 GMT