AirTime ATX6 Installatie- en gebruikershandleiding - Pagina 7
Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} AirTime ATX6. AirTime ATX6 16 pagina's. Wireless wall clock transceiver
Pagina afdrukkenATX6 Installation and User Guide
Synchronizing the ATX6 to a LTR-GPS
Page 23
ATX6 Installation and User Guide
3. Mount the ATX6 on a suitable wall, according to the
following steps.
If mounting near a ceiling, make sure the top holes are
at least 2" away from the ceiling.
If an external amplifier will be used, mount the ATX6
within 6 feet of its location.
» After deciding the location where the clock will be
mounted, use the enclosed template to make the three
marks for the mounting screws.
» Drill a 5/16" hole at each of the marks
» Insert a wall anchor in each hole and tap it flush to the
wall with the hammer.
» Insert a screw into the top two wall anchors leaving 1/8"
exposed.
» Line up the two keyholes on the back of the case and slip
over the two screws.
» The lower mounting screw can now be inserted into the
wall anchor and secured.
Page 4