AirTime ATX6 Kurulum ve Kullanım Kılavuzu - Sayfa 7
Alıcı-Verici AirTime ATX6 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. AirTime ATX6 16 sayfaları. Wireless wall clock transceiver
Sayfayı YazdırATX6 Installation and User Guide
Synchronizing the ATX6 to a LTR-GPS
Page 23
ATX6 Installation and User Guide
3. Mount the ATX6 on a suitable wall, according to the
following steps.
If mounting near a ceiling, make sure the top holes are
at least 2" away from the ceiling.
If an external amplifier will be used, mount the ATX6
within 6 feet of its location.
» After deciding the location where the clock will be
mounted, use the enclosed template to make the three
marks for the mounting screws.
» Drill a 5/16" hole at each of the marks
» Insert a wall anchor in each hole and tap it flush to the
wall with the hammer.
» Insert a screw into the top two wall anchors leaving 1/8"
exposed.
» Line up the two keyholes on the back of the case and slip
over the two screws.
» The lower mounting screw can now be inserted into the
wall anchor and secured.
Page 4