Attero Tech unA4O AES67 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Attero Tech unA4O AES67. Attero Tech unA4O AES67 11 pagina's. Four output interface

Pagina afdrukken

3.3 – Factory Reset

*******************************************************************

IMPORTANT

*******************************************************************

The factory reset returns the entire device to its factory defaults.

Using this feature will mean all custom AES67 settings and all

audio power-on default settings will be cleared.

*******************************************************************

*NOTE: The factory reset is a useful way of quickly restoring

communications with a device which has an unknown static IP

address as a factory reset returns the device's network settings

to getting a dynamic IP. Having successfully completed a factory

reset of the device, setting the PC's IP address to also obtain a

dynamic IP address should then allow the PC to communicate fully

with that device.

The factory reset button is accessed through a small hole on the

front of the unit using a small screwdriver or a paperclip. A factory

reset is initiated by pressing and holding this button for 5

seconds or more while the device is running and then releasing

it. If done correctly, the status will change state as the unit goes

through a reset process. If the LED's remain green immediately

after releasing the button, that is an indication the button was not

held for long enough and the factory reset was not applied.

Having applied a successful factory reset, on the AES67 side,

customized device name and channel names will be cleared, the

transmit stream data cleared and disabled and any receiver

stream data will be removed. The network settings will also be

reset so the device will return to retrieving an IP address

dynamically. The power-up defaults for the audio settings are also

cleared. For every output, output volume is set to maximum (0dB)

and the output mute is disabled.

1315 Directors Row Suite 107 Fort Wayne, IN 46808 ⁞ (260) 496-9668 ⁞ www.atterotech.com

3.4 – Firmware Updates

The unA4O has the ability to be updated. Updates are applied

via the network using Attero Tech unIFY Control Panel's Smart

Firmware update facility. The latest unA4O SFU file is available

from the Attero Tech customer portal.

3.5 – 3rd Party Control

The unA4O supports 3

party control allowing external system to

manage the unA4O's settings such as phantom power, mic/line

gain options and control of presets. The interface which is

available to anyone to use with any device capable of sending and

receiving UDP messages.

Information on the commands the unA4O supports as well as

details of how to use the 3

the unIFY 3

party Software API document, available from the

registered users section of the Attero Tech website (Go

www.atterotech.com

and click on the log-in option).

party UDP interface can be found in

Page 10