DStv 5-1 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DStv 5-1. DStv 5-1 17 pagina's.

• The DStv Switch (5-1) has:

- Four inputs (labelled H/L, V/L, H/H, V/H);

- Four normal multiswitch outputs (labelled 1 to 4); and

- Two Explora outputs (labelled A and B). The DStv Explora can only be

connected to this output.

• Each multiswitch output (labelled 1 to 4) outputs a signal equivalent to a

normal multiswitch output or a single LNB output.

• The DStv Switch comes with 3 cables. You may need additional cabling,

depending on your set up.

• The DStv Switch self-terminates unused

ports, which means you don't have to cap

them.

• You'll know your switch is powered when

the blue light is on.

• Keep in mind - this switch is not a signal

booster.

Troubleshooting Tip

If the DStv Switch's blue light is not on (indicating that it's getting power), check that the outputs to

the decoder(s) are: 1) Securely connected (both to the switch and decoder), and 2) That the decoder(s)

themselves are switched on and getting power.

DStv Switch - User Guide

Your DStv Switch (5-1)

DStv Switch (5-1)

Inputs

H/L

V/L

H/H

V/H

Multiswitch outputs

Explora

outputs