DT SWISS 240 OVERSIZE Technisch handboek - Pagina 10

Blader online of download pdf Technisch handboek voor {categorie_naam} DT SWISS 240 OVERSIZE. DT SWISS 240 OVERSIZE 14 pagina's.

3.5 CLEANING AND DEGREASING ALL PARTS

Clean all parts of the hub (see "Cleaning" on page 4)

1. Slightly grease the seating of the bearings and

the inner surface of the hub shell using universal

grease.

2. Put the axle onto the installation cylinder.

3. Put the drive side of the hub shell onto the

installation cylinder and the axle.

4. Slightly grease the bearing and put it onto the non

drive side with the colored side facing outwards.