DT SWISS 240 OVERSIZE 기술 매뉴얼 - 페이지 10

{카테고리_이름} DT SWISS 240 OVERSIZE에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DT SWISS 240 OVERSIZE 14 페이지.

3.5 CLEANING AND DEGREASING ALL PARTS

Clean all parts of the hub (see "Cleaning" on page 4)

1. Slightly grease the seating of the bearings and

the inner surface of the hub shell using universal

grease.

2. Put the axle onto the installation cylinder.

3. Put the drive side of the hub shell onto the

installation cylinder and the axle.

4. Slightly grease the bearing and put it onto the non

drive side with the colored side facing outwards.