AddEnergie SmartDC V2 Installatiehandleiding - Pagina 11
Blader online of download pdf Installatiehandleiding voor {categorie_naam} AddEnergie SmartDC V2. AddEnergie SmartDC V2 15 pagina's. V2
Pagina afdrukkenInstalling the Station onto the Base
Power cable access plate
1 . Remove the access plate to allow the passage of the power cable .
2 . Place the station onto its base, making sure to pass the power cable through the access hole .
3 . Punch a hole in the access plate of an appropriate diameter for the cable connector .
4 . Install the cable connector onto the access plate .
5 . Insert the power cable into the cable connector .
6 . Put the access plate back in place .
11
2017 ADDÉNERGIE TECHNOLOGIES INC. ALL RIGHTS RESERVED. Information and Specifications Contained in this Document are Subject to Change, Amendments, and Additions at any Time, Without Notice