Elite Acoustics Engineering A4-8 Snelstarthandleiding - Pagina 9
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Elite Acoustics Engineering A4-8. Elite Acoustics Engineering A4-8 13 pagina's. Live-performance studio monitor with 4 channels, mixer, effects, and bluetooth
Pagina afdrukken
1.
To fully charge a unit –
a. Set Battery Switch to "CONNECT"
b. Turn Power Switch OFF
c. Connect "AC" adaptor to Power Jack.
d. Blue "Charge" LED should be lit, Charge time can vary from 24 – 36 hours
depending on model and also surrounding temperature. In some case, Battery
will be 99% charged after 24-36 hours, but the charge light will remain on.
2.
When unit is powered with "AC" adaptor, Battery Switch should be in "CONNECT"
position.
3.
Battery Switch should be on "DISCONNECT" when unit is packed for transit or unit
is in storage. Make sure battery is fully charged before UNIT is put into storage. We
recommend fully charging the battery at least once each month.
4.
SLA battery lifetime is typically 1 – 2 years depending on usage.
5.
DO NOT OVERDRAIN the battery by leaving unit ON for a long period of time.
Battery
Level
3
2
1
Low
Charge
•
Unit can operate normally when plug into the Car Adaptor.
•
Battery can also be charged by using the Car Adaptor.
•
It is not recommedate that you leave the unit plugged in while car is not running.
EAE BATTERY & RECHARGING INFORMATION
•
Recharge after every use
•
Use & recharge battery at least once a month
•
DO NOT leave power switch in the "ON" position when it is not
in use. Doing so after a long period of time will damage the
battery
•
If unit is always plugged in, it is recommendate to put Battery
Swtich in Disconnected position, but make sure to recharge unit
monthly.
•
Keep unit in a cool, dry place away from extreme temperatures
•
Do not service, modify, or replace the battery
•
If the battery fails to charge, contact Elite Acoustics Engineering