DUCTFORMER TDFC Bedienings- en procedurehandleiding - Pagina 9

Blader online of download pdf Bedienings- en procedurehandleiding voor {categorie_naam} DUCTFORMER TDFC. DUCTFORMER TDFC 12 pagina's. Power brake

MANUAL CLAMP – This push button allows the press to stay down when the press is

moved to the lowest position. Press and hold the PRESS DOWN button until the press

is run all the way down; then without releasing simultaneously press the MANUAL

CLAMP button to hold the clamp press in the clamping position. After releasing both

buttons press the PRESS DOWN button again to move the press back to the up

position.

Machine must be selected to MANUAL mode.

FOLDER UP – This push button operates the folder mechanism. When pressed the

folder assembly will swing up to brake the part. Machine must be selected to MANUAL

mode and Press in the down clamp position to operate folder manually.

FOLDER DOWN – This push button operates the folder mechanism. When pressed

the folder assembly will swing down off of the part. Machine must be selected to

MANUAL mode and Press in the down clamp position to operate folder manually.

10. Understanding the machine

10.1 Press Assembly: The Press Assembly is driven up and down with a

large pneumatic cylinder. In manual mode the Press Assembly can be

raised or lowered with the push buttons on the front control panel. In

Automatic mode the Press Assembly will lower at the beginning of the

machine cycle and rise at the end.

10.1 Folder Assembly: The Folder Assembly is moved up and down with a

large pneumatic cylinder. In manual mode the Folder Assembly can be

raised or lowered with the push buttons on the front control panel. In

Automatic mode the Folder Assembly will rise up at the beginning of the

machine cycle and down at the end.

OPERATING and PROCEDURES MANUAL

Page 9 of 12

TDFC POWER BRAKE