3onedata GW11X8-8D (3IN1)-RJ45 Series Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3onedata GW11X8-8D (3IN1)-RJ45 Series. 3onedata GW11X8-8D (3IN1)-RJ45 Series 4 pagina's. Modbus gateway

Pagina afdrukken

Front view:

Rear view:

GW1108-8D(3IN1)-RJ45



GW1118-8D(3IN1)-RJ45



Side view:

Bottom view:

Power indicator

Running statues indicator

Ethernet port Link/ACT indicator

Serial port receive and transmits data indicator

RS-232/485/422 serial port

Power input terminal block

Grounding screw

DIP switch

Console port

10. 10/100Base-T(X) Ethernet port

11. Rubber shock absorber pad

12. Screw holes for Wall Mounting Kit

【Dimension】

Unit: mm

【Power supply input】

The device provide DC power input, voltage input is the

three terminal form, plug type 3-pin spacing of 5.08mm

terminals, wherein the power input range of 12~48VDC. (V+,

FG, V-)

Notice:

- 2 -

1. Power ON operation: insert power cable's terminal block

into device's power port, and then connect power supply

plug to a power source.

2. Power OFF operation: unpin power plug, and then

disconnect the terminal block, please note operation

sequence.

【DIP switch】

The rear panel provides a 4-pin DIP switch to do function

configure (OFF is default factory). 1, 3 and 4 are reserved. 2

is recovery default factory. Please power off and power on

when you change the status of a DIP switch.

【Console port】

The device provides 1pcs procedure test port based on the

serial port. It adopts RJ45 interface, located on the front

panel, can configure related command through RJ45 to DB9

female cable.

【Communication connector】

10/100Base-T(X) Ethernet port

The pinout define of RJ45 port display as below, connect by

UTP or STP. The connect distance is no more than 100m.

100Mbps is used 120Ω of UTP 5, 10Mbps is used 120Ω of

UTP 3, 4, 5.

RJ 45 port support automatic MDI/MDI-X operation, connect

the

PC,

Server,

Converter

and

Corresponding connection in MDI. 1→3, 2→6, 3→1, 6→2

are used as cross wiring in the MDI-X port of Converter and

HUB. 10/100Base-T(X) are used in MDI/MDI-X, the define of

HUB

.Pin

1,2,3,6