Duke 2505249 Instructieblad - Pagina 2

Blader online of download pdf Instructieblad voor {categorie_naam} Duke 2505249. Duke 2505249 4 pagina's. Pos support bracket kit

Installation and Operation of: POS Bracket Installation

POS SUPPORT BRACKET INSTALLATION

Start by disconnecting all electrical equipment located on top of the POS arm and set it aside in a

safe location.

Failure to disconnect power to equipment could cause equipment damage and or bodily injury.

Remove the screws that are holding the POS arm in place, which are located underneath the

countertop.

Pull the POS arm out of the counter and pull all wires out of the bottom of the arm. Remove

and discard the rectangular cover plate that goes around the POS arm and rests on top of the

countertop.

Do NOT discard these screws as they will be used in a later step.