Danfoss Holip HLP-V Series Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Danfoss Holip HLP-V Series. Danfoss Holip HLP-V Series 10 pagina's.

This Instruction Manual can be used for all Holip-V Series adjustable frequency drives.

The software version number can be seen from parameter 624.

The HLP-V Adjustable Frequency Drive

contains dangerous voltages when con-

nected to line voltage. After disconnect-

ing from the line wait at least 15 minutes

b e f o r e t o u c h i ng a n y e l e c t r i c a l

components.

Also make sure that other voltage inputs

have been disconnected, such as exter-

nal 24 VDC, load-sharing (linkage of DC

intermediate circuit), as well as the mo-

tor connection for kinetic back-up. Only

a competent electrician should carry out

the electrical installation. Improper instal-

lation of the motor or the Holip may cause

equipment failure, serious injury or death.

Follow this manual and National Electri-

cal Codes and local safety codes.

NOTE

Electrostatic Precaution; Electrostatic dis-

charge (ESD). Many electronic compo-

nents are sensitive to static electricity.

Voltages so low that they cannot be felt,

seen or heard, can reduce the life, affect

performance, or completely destroy sen-

sitive electronic components. When per-

forming service, proper ESD equipment

should be used to prevent possible dam-

age from occurring.

HLP-V Series

Holip-V Series

Instruction Manual

It is the responsibility of the user or the

person installing the Holip to provide

proper grounding, as well as motor over-

load and branch circuit protection ac-

cording to the National Electrical Code

and local codes.

By altitudes above 2000 m, please con-

tact Holip.