Danfoss Holip HLP-V Series Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Приводи постійного струму Danfoss Holip HLP-V Series. Danfoss Holip HLP-V Series 10 сторінок.
Друкувати сторінку
This Instruction Manual can be used for all Holip-V Series adjustable frequency drives.
The software version number can be seen from parameter 624.
The HLP-V Adjustable Frequency Drive
contains dangerous voltages when con-
nected to line voltage. After disconnect-
ing from the line wait at least 15 minutes
b e f o r e t o u c h i ng a n y e l e c t r i c a l
components.
Also make sure that other voltage inputs
have been disconnected, such as exter-
nal 24 VDC, load-sharing (linkage of DC
intermediate circuit), as well as the mo-
tor connection for kinetic back-up. Only
a competent electrician should carry out
the electrical installation. Improper instal-
lation of the motor or the Holip may cause
equipment failure, serious injury or death.
Follow this manual and National Electri-
cal Codes and local safety codes.
NOTE
Electrostatic Precaution; Electrostatic dis-
charge (ESD). Many electronic compo-
nents are sensitive to static electricity.
Voltages so low that they cannot be felt,
seen or heard, can reduce the life, affect
performance, or completely destroy sen-
sitive electronic components. When per-
forming service, proper ESD equipment
should be used to prevent possible dam-
age from occurring.
HLP-V Series
Holip-V Series
Instruction Manual
It is the responsibility of the user or the
person installing the Holip to provide
proper grounding, as well as motor over-
load and branch circuit protection ac-
cording to the National Electrical Code
and local codes.
By altitudes above 2000 m, please con-
tact Holip.
3