Danfoss REPI Series Handmatig

Blader online of download pdf Handmatig voor {categorie_naam} Danfoss REPI Series. Danfoss REPI Series 3 pagina's.
Ook voor Danfoss REPI Series: Gegevensblad (4 pagina's)

Pagina afdrukken
Danfoss REPI Series Handmatig
REPI Series Digital Thermostat Manual
REPI series thermostats are used to control room temperature in industrial, commercial
and residential environment via controlling electric modulating valve with 0-10VDC (4-20mA)
control signal or floating control as well as damper actuator of VAV system.
Electronic control technology is adopted, with green backlit LCD display of: working mode
(cooling "
", heating "
", ventilating "
auto "
"); room temperature; setting temperature etc. push button: On/Off "
changeover "
"; fan speed choose "
Shell: PC + ABS retardant material.
Function :
Detect and Display room temperature
Room temperature setting
Fahrenheit or Celsius degree display
Order Guide:
Model
Floating
REPI-2
REPI-2N
REPI-4
REPI-4N
Fan: thermostat with fan functions, can be selected with single speed fan or three speed fan by setting parameter.
Remote Control: input signal can be selected by setting parameter.
Specification :
Set temperature range: 0 - 99.5℃ adjustable
Accuracy displayed:
Accuracy:
Rated Power:
Sensor type:
Display:
Operations:
On/Off: Press "
" buttons to turn on; press "
Setpoint: With thermostat on, press "
0.5℃, the setpoint will be confirmed automatically after 5 seconds, and then return to dispay status, press "
check setpoint.
Mode: With thermostat on, press "
( Auto is available REPI-4/ REPI-4N).
Fan Speed: With thermostat on, press "
"
", auto "
". If single speed fan available, there's only med speed "
Under auto speed fan, the fan speed will be changed automatically as below: in low speed when room temperature
is 1℃ difference with setpoint;in med speed when room temperature is 2
room temperature is 3
Sleep: Thermostat will get into sleep function after programming.The set Temperature should to be.
", auto "
" ); fan speed (low "
" and temperature adjustment "
Output signal
Modulation
Cooling/Heating
Cooling/Heating
Cooling&Heating
Cooling&Heating
0.1℃
±0.5℃
< 1 W
NTC
LCD
" again to turn off.
" to reduce the setpoint, press "
" to change the working mode – Cooling "
" to select the desired speed – low speed "
℃
difference with setpoint.
", med "
", high "
" and "
".
Timing sleep
Control On/Off of cooling and heating equipment
Selectable single speed or three speed fan control
Fan
(Single/3-speed)
√
√
√
√
Power:
Output signal:
Input signal:
Dimensions:
Fixing screw width : 60mm (Standard)
" to increase the setpoint, the setpoint step is
".
difference with setpoint
℃
Page 1 of 3
",
"; mode
RS485
Input
Network
Control
√
√
√
√
√
√
AC 24V±10％, 50Hz/60Hz
resistive
AC 24V×2 (0.5A
0 - 10VDC(5mA) / 4 - 20mA (600Ω)
dry contact (NO)
86×86×23mm (W×H×D)
"， Heating "
", Vent "
", Med speed "
", High speed
; in High speed when
Remote
Sensor
√
√
√
√
) ,
" or "
" to
", Auto "
"