Duolabs Season Wireless Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Duolabs Season Wireless. Duolabs Season Wireless 14 pagina's.

Software

Season Wireless is supplied with a software for PCs that can be used to setup

and upgrade the Slave and Master. This software requires the use of Windows

operating systems.

The device can operate correctly only if the Slave is powered at 9 V, the Master

is connected to the PC through the USB and RS-232 serial ports, the updated

drivers for the Master have been installed on the PC and if the software is

running on the PC.

The two units are configured with the following default settings that can be

changed through the software:

Operating mode: Season (smartcard emulation) or Logger (traffic analysis)

•

Wireless transmission channel (to allow the simultaneous use of several

•

Slave/Master units)

ATR to be sent to the remote device

•

Settings for serial communications; baud rate and parity before and after

•

the transmission of the ATR to the remote device.

To change the initial settings of the device, press Firmware on AIR in the

software panel.

Season Wireless – User Manual