Duolabs Season Wireless Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Instrumentos de medição Duolabs Season Wireless. Duolabs Season Wireless 14 páginas.

Duolabs Season Wireless Manual do utilizador
Software
Season Wireless is supplied with a software for PCs that can be used to setup
and upgrade the Slave and Master. This software requires the use of Windows
operating systems.
The device can operate correctly only if the Slave is powered at 9 V, the Master
is connected to the PC through the USB and RS-232 serial ports, the updated
drivers for the Master have been installed on the PC and if the software is
running on the PC.
The two units are configured with the following default settings that can be
changed through the software:
Operating mode: Season (smartcard emulation) or Logger (traffic analysis)
Wireless transmission channel (to allow the simultaneous use of several
Slave/Master units)
ATR to be sent to the remote device
Settings for serial communications; baud rate and parity before and after
the transmission of the ATR to the remote device.
To change the initial settings of the device, press Firmware on AIR in the
software panel.
Season Wireless – User Manual
www.duolabs.com
– All rights reserved
4