Freedom Enterprise PATCHMODULE01 Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Freedom Enterprise PATCHMODULE01. Freedom Enterprise PATCHMODULE01 13 pagina's.
Pagina afdrukkenFREEDOM ENTERPRISE
Assembly
Start by soldering the red 8-pin female header.
Solder the two 220 F
Solder the remaining components. If you have any trouble fitting the RCA
jacks and potentiometers to the PCB, please use a plier to straighten out the
component's leads. Beware that two of the 3.5 mm jacks have had a specific
pin removed in order to fit in the PCB.
Clean the flux residue left behind. Finish off by soldering the two 12 mm spring
loaded SMD pin on the back. Make sure they are centred on the pad and
that they make contact with the resistor underneath on the MisMatcher01
board when assembled.
User Interface
1 RCA Connector A
1.1 RCA Access Point A
2 2.1 mm X 5.5 mm DC Jack
3 RCA Connector B
3.1 RCA Access Point B
electrolytic capacitors, the 270 resistor and LED.
5