DuPure EcoPur S-Series Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DuPure EcoPur S-Series. DuPure EcoPur S-Series 10 pagina's. Whole-home system

Pagina afdrukken

SYSTEM SPECIFICATIONS

The EcoPur S-Series point-of-entry system is complete and self-contained. It is

pre-loaded with media and ready to use. A simple inlet and outlet connection

is all that is required for installation. Please review operating pressures, tempera-

tures and water chemistry limitations to ensure compatibility.

Connections

Temperature Range

Water Pressure Range

Ferrous Iron Maximum

Manganese Maximum

Copper Maximum

Flow Rate

Caution: Do not use this system where the water is microbiologically unsafe or

of unknown quality. This system is for use on potable water only. Source water

exceeding the chemical parameters (listed above) requires pretreatment.

IMPORTANT SAFETY INFORMATION – READ ALL

CAUTION: Read and follow the information in this manual to minimize the risk of

electric shock or personal injury.

IMPORTANT: If you are unsure about installing your EcoPur S-Series, contact the

DuPure helpline or consult a professional plumber.

IMPORTANT: This system must be installed in compliance with applicable state

and local codes, law, and regulations.

INSTRUCTIONS BEFORE USING:

• Before beginning installation, read these instructions completely.

Then obtain all the materials and tools needed for installation.

NOTE: Failure to install the EcoPur S-Series system correctly voids the

warranty

• Perform installation according to state and local plumbing codes

Use only lead-free solder and flux for sweat-solder connections,

as required by state and federal codes

• Handle all components of the EcoPur S-Series system with care. Do not drop,

drag or turn components upside down

40-110°F

15-100 psi

6.5-8.5

0.3 mg/L

0.05 mg/L

1.3 mg/L

12 GPM