DuPure EcoPur S-Series Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DuPure EcoPur S-Series. DuPure EcoPur S-Series 10 pagina's. Whole-home system

Pagina afdrukken

NOTES:

• If making a soldered copper installation, do all sweat soldering before con-

necting pipes to the bypass valve (torch heat will damage plastic parts)

• When turning threaded pipe fittings onto plastic fittings, use care not to cross-

thread

• Use Teflon tape on all external pipe threads. Do not use pipe joint compound

• Support inlet and outlet plumbing in some manner (use pipe hangers) to

keep the weight off of the valve fittings

Perform steps 6-7 to install flexible drain hose

Skip to step 8 to install rigid drain pipe

6. Find barbed hose fitting in small parts kit. Attach barbed hose fitting to the

½" male NPT drain outlet

7. Connect and route the valve drain hose

- Use the provided drain hose to attach to the valve drain fitting. To keep

water pressure from blowing the hose off, use a hose clamp to secure

8. To adapt a rigid drain pipe to the EcoPur S-Series system, do not attach

barbed hose fitting to valve. Instead, plumb rigid tubing directly to the

½" male NPT drain fitting

9. Take the other half of the cut hose and attach it to the overflow adapter

elbow located on the side of the brine tank. Use a hose clamp to hold it in

place

10. Fully open two (2) cold (soft) water faucets near the water softener

11. Place bypass valve in "bypass" position