Audionet AMP II MAX Gebruikershandleiding - Pagina 6
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Audionet AMP II MAX. Audionet AMP II MAX 13 pagina's.
Ook voor Audionet AMP II MAX: Gebruikershandleiding (13 pagina's)
"Warm Up" Countdown
Automatic shut down will happen when no input signal is detected for a
user definable time (30 seconds up to 2 hours).
To activate and setup this feature please refer to chapter "Programming".
Due to security concerns the "Auto-On" feature will only be availible
after first manual switching on!
While you are absent your AMP II MAX can switch on automatically and
will be pre-heated for use when you get back. To activate this feature
please use a long key press on the "power" button at the front. The display
changes to show the countdown timer. A cursor will mark the number to
be changed. A long key press will move the cursor one step to the right.
Using a short key press, you can change the desired number. Hours can
be programmed in steps of one hour. Minutes can be programmed in
steps of 15 min. The following diagram explains the possible countdown
timer settings:
01 hour
15 min
11 hours 15 min
91 hours 15 min
10-hours-setting
Legend:
long key press
Activate countdown by leaving the timer setting menu with a long key
press. It will be activated automatically if you do not change any setting
for longer than 10 seconds.
If you want to use the count down timer again it is activated by a single
key press. Press the "power" button for more than 2 seconds and wait.
After 10 seconds the previous set up countdown will start again.
To deactivate use a short key press at any time.
01 hour
15 min
02 hours 15 min
00 hours 15 min
1-hour-setting
6
01 hour 15 min
01 hour 30 min
01 hour 00 min
Min-setting
short key press