Audionet AMP III Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Audionet AMP III. Audionet AMP III 16 pagina's. Three channel power amplifier
Ook voor Audionet AMP III: Gebruikershandleiding (11 pagina's)

Pagina afdrukken
Audionet AMP III Gebruikershandleiding
5

Inputs and outputs

Important
·
For connecting or removing loudspeakers and/or the pre ampli-
fier the your AMP III must be switched off to prevent damage on
the amplifier or the connected units.
·
Please make sure that all cables are in absolute best conditions!
Broken shields or short-cut loudspeaker cables could damage
speakers and/or amplifiers.
5.1

Line inputs

At first, connect your pre amplifier to the line inputs 3 , 8 and 11 of
the AMP III. Go by the names of the channels printed above the input
jacks.
Note
·
Please refer to the following table for some recommended setups of
typical speaker configurations:
Configuration
5.1 standard system
with separate amplifiers for L/R
5.1 standard system
with separate amplifiers for LS/RS
7.1 system with separate
amplifiers for LS/RS and LB/RB
7.1 system with separate
amplifiers for L/R and LS/RS
3 channel system
2 channel system
·
Of course, channel assignments differing from the table above are
possible. Preferably assign channels 1 & 3 first.
AMP III line inputs
1
2
LS
C
L
C
L
C
LB
C
L
C
L
n.c.
L = Left
LS = Left Surround
C = Center
RS = Right Surround
R = Right
n.c. = not connected
10
3
RS
R
R
RB
R
R
LB = Left Back
RB = Right Back